K.S.Rangasamy College of Technology (Autonomous)

Approved by AICTE, New Delhi & Affiliated to Anna University, Chennai

Accredited by NAAC & Courses Accredited by NBA with Tier-I Category DST – FIST

& DBT STAR Sponsored College, Included under Section 2(f) & 2(b) by UGC

Research (B.E.Mech)

MECH Research

List of Faculty Members  Recognized as Research (Ph.D.) Supervisors
S.No
Name of the Staff
A.U. Chennai Supervisor Recognition Lr. No. & Date
1.
Dr. Kumaravel A
Lr.No.CFR/NEWSUP /2015 & 23.01.2015
2.
Dr. Sambath  P.S
Lr.No.CFR/NEWSUP /2015 & 23.01.2015
3.
Dr. Murugesan A
Lr.No.SUPR/21st RB / DB  & 31.05.2013
4.
Dr. Gopalakrishnan S
Lr.No.SUPR/21st RB / DB  & 30.05.2013
5.
Dr. K.Mohan
Lr.No.SUPR/27th /DB  & 02.08.2016
6.
Dr.V.P.Arthanarieswaran
Lr.No.SUPR/27th /DB  & 16.08.2017
7.
Dr.G.Venkatachalam
Lr.No.SUPR/32nd /DB  & 02.03.2019
Research Guidance Details (Inside KSRCT)
S.NoName of The Supervisor with Recognized NumberName of The Scholar with College AddressDate of registrationDate of Viva Voce Examination (if Completed)Faculty in with Ph.D./M.S.is CompletedTitle of the ThesisName of the University 
1Dr. Kumaravel A, 2120189Dr.G.Venkatachalam, KSRCT, Tiruchengode04.09.201019.11.2018Composite MaterialsInvestigation on Mechanical and Wear Behavior of SiC/Fly Ash/Basalt Reinforced Aluminium Alloy CompositesAnna University, Chennai
2Dr. V.P.Arthanarieshwaran, KSRCT, Tiruchengode17.02.201126.05.2017Composite MaterialsInvestigation on palmyra palm fruit fiber reinforced Epox Composite MaterialAnna University Chennai
3Dr.T.Natarajan, KSRCT, Tiruchengode08.01.201014.09.2018Composite MaterialsPreparation, characterization and Properties of Passiflora Foetida fiber reinforced polycaprolactone Based Biodegradable Green Composites.Anna University, Chennai
4Dr.K.Santhanam, KSRCT, Tiruchengode08.01.201023.11.2018Composite MaterialsStudies on Ipomoea Staphylina fiber characterization and mechanical properties of impmoen staphylina fiber reinforced epoxy compositesAnna University, Chennai
5 

 

 

 

 

 

Dr.M.Kathirselvam, KSRCT, Tiruchengode04.07.201624.06.2020Composite MaterialsEvaluation of mechanical and tribological properties of the natural fiber reinforced polymer compositesAnna University, Chennai
1 

 

 

Dr.A.Murugesan, 2120263

Dr. C.VIJAYAKUMAR, KSRCT,Tiruchengode09.12.2016I.C EnginesExperimental and Theoretical Investigation on Compression Ignition Engine Characteristics Fuelled with Diesel-Biodiesel blends Doped with Copper Oxide Nano ParticlesAnna University, Chennai
2Dr.M.Krishnan,KSRCT, Tiruchengode26.07.200708.05.2015I.C EnginesDynamic Scheduling and layout planning by using hybrid evolutionary method in the flexible manufacturing systemAnna University Chennai
3M.Moorthi, KSRCT, Tiruchengode01.07.2018PursingI.C EnginesExperimental Investigation of DI-CI LHR Engine Characteristics Operated with Oxygenated FuelsAnna University, Chennai
4C.Ramesh, KSRCT, Tiruchengode03.01.2019PursingI.C EnginesIntegrated design and experimental investigation on reducing emissions from DI-CI LHR Diesel engine using port fuel injection systemAnna University, Chennai
5R.Prakash, KSRCT, Tiruchengode09.01.2019PursingI.C EnginesExperimental Investigation on DI-CI LHR Diesel engine operated with electronically controlled hot and cold EGR integrated with port fuel injection systemAnna University, Chennai
6S.Srinithi, KSRCT, Tiruchengode07.02.2022PursingI.C EnginesDesign and development of Novel nano coated catalytic convertor for reducing emissions in diesel engineAnna University, Chennai
1

Dr. Sampath  P.S, 2120394

Dr. N.Saravanan, KSRCT, Tiruchengode17.02.201119.11.2018Composite MaterialsStudies on Charaterization of surface Treated lagenaria siceraria Fiber and its Reinforcement Effect on Epoxy composites.Anna University, Chennai
2Dr.M.S.Senthil Kumar, KSRCT, Tiruchengode04.09.201020.10.2016Composite MaterialsStudies of Mechanical, Tribological and Fracture Toughness Properties of Glass Fiber/Nano clay/Epoxy NanocompositesAnna University Chennai
1Dr.K.Mohan, 2820033M.Gnanasekaran, KSRCT, Tiruchengode03.01.2013PursingWeldingFriction welding of copper tube to aluminium tube plate using an external tool-A studyAnna University, Chennai
2S.Sakthivel,  KSRCT, Tiruchengode20.12.2016PursingWeldingMechanical Behavior and microstructure in a dissimilar friction stir welding joint of aluminiumAnna University, Chennai
3S.Karthikeyan, KSRCT, Tiruchengode28.06.2017PursingWeldingProduction and Characterization of friction stir welding of aluminium metal matrix compositeAnna University, Chennai
1Dr.S.Gopalakrishnan, 2120108E.Thirumoorthi, KSRCT, Tiruchengode19.02.2016PursingWeldingFriction stir welding of dissimilar materialsAnna University, Chennai
Research Guidance Details (Outside KSRCT)
 
1Dr. Kumaravel A, 2120189Dr. P.Kanagarajan, KSRCE, TiruchengodeJan 201120.11.2018Composite MaterialsExperimental  Investigation on Surface roughness of machined alumina and simultaneous wear of silicon carbide grinding wheel by using acoustic emission TechniqueAnna University, Chennai
2Dr.S.S.Saravanakumar, kamaraj College of Engineering and Technology, Madurai31.10.2014Composite MaterialsCharacterization of Natural Cellulosic prosopis juliflora Fibers as Potential Reinforcement for Polymeric MatricesAnna University, Chennai
3Dr. K.KARPAGAVANI, Sona College of Engineering, Salem13.01.2016Composite MaterialsDevelopment of diagnostic techniques for remote monitoring of pollution severity of electric power transmission systemAnna University, Chennai
4Dr. V.L.RAJA, Knowledge Institute of Technology, Salem23.07.201101.08.2016Composite MaterialsInvestigation on mechanical and wear properties of fly ash and silica fume filled nylon 66 composites.Anna University, Chennai
5Dr.M.Gnanasekaran, KSRCE, Tiruchengode30.08.200806.10.2017WeldingStudies on 304Austenitic stainless steel weldments using activated TIG welding ProcessAnna University Chennai
6R.Surendran, Government College of Engineering, Salem04.09.2010PursingComposite MaterialsEffect on Behavior of Nano Aluminum Oxide on Lm Alloy By Varying The CompositionAnna University, Chennai
7V.Ananda Babu, Angel Engineering College24.12.2014PursingComposite MaterialsProperties and characterization of mg matrix hybrid and unhybrid composites based on rare earth oxides and solid lubricants reinforcement.Anna University, Chennai
8C.Lakshmana priya, Angel Engineering College24.12.2014PursingComposite MaterialsSelection of suppliers for manufacturing industry by hybridization algorithmsAnna University, Chennai
9B.Siddharthan, Bannari amman institute of technology, Sathyamangalam01.07. 2018PursingComposite MaterialsMachining of Aluminum Alloy/Silicon Carbide Based Functionally Graded Material By abrasive water jetsAnna University, Chennai
1Dr.A.Murugesan, 2120263Dr. D.SUBRAMANIAM, Mahendra Engineering College, Salem 12.04.201020.03.2015I.C EnginesExperimental and Theoretical Investigation on Esters of non-edible oil as an alternative fuel for diesel engineAnna University, Chennai
2Dr. N.PANEERSELVAM, Knowledge Institute of Technology, Salem –09.02.2018I.C EnginesPotential of waste Tyre Pyrolysis oil as an alternative fuel for diesel engineAnna University, Chennai
3A.Avinash, KPR college of Engineering, Coimbatore22.02.201623.12.2019I.C EnginesExperimental Investigation on dual-fuel premixed change compression ignition engine.Anna University, Chennai
4S.T.Kumaravel, Pavai College of Engineering, Namakkal01.01.201425.02.2021I.C EnginesExperimental Investigation of Pyrolysis oil as an alternative fuel for diesel engineAnna University, Chennai
1Dr. Sampath  P.S, 2120394Dr. T.Ramakrishnan, Sri Eshwar College of Engineering, Coimbatore24.04.201114.09.2018Composite MaterialsInvestigation on Mechanical Properties and Wear Behaviour of Agave Angustifolia Marginata Fiber Reinforced Polymer matrix compositesAnna University, Chennai
2Dr.R.Jeyakumar, Sri Krishna College of Engineering and Technology

 

04.09.201023.01.2019Composite MaterialsStudies of Mechanical Behaviour of Glass Fiber Modified Epoxy Nano CompositesAnna University, Chennai
3M.Bhuvaneshwaran, KSRCE, Tiruchengode08.01.201315.06.2020Composite MaterialsStudy of Mechanical behavior of synthetic fiber compositeAnna University, Chennai
4Dr. L.BOOPATHI, Erode Sengundhar College of Engineering, Erode05.04.200930.09.2013Composite MaterialsStudies on Borassus fruit fiber reinforced epoxy composites and their applicationsAnna University, Chennai
5Dr. C.VIVEKANANADHAN, Arulmurugan College of Engineering, Karur02.09.201021.07.2017Composite MaterialsAnalysis of mechanical properties of glass and kevler fiber with modified  Epoxy hybrid compositesAnna University, Chennai
6Dr. R.RAMAMOORTHI,Sri Krishna College of Engineering and Technology, Coimbatore

 

23.02.201008.12.2015Composite MaterialsInvestigations of mechanical properties of glass fiber/modified Epoxy Nano compositesAnna University, Chennai
7S.Balu, PSNA College of Engineering and Technology, Dindigul08.01.2013PursingComposite MaterialsStudy of thermal behavior of synthetic fiber compositeAnna University, Chennai
8S.Arul Angappan, SSM College of Engineering, Komarapalayam27.12.2012PursingComposite MaterialsAnalysis of Mechanical Properties of Natural Fiber Reinforced Hybrid CompositesAnna University, Chennai
9A.Karthick, SSM College of Engineering, KumarapalaymJuly 2014PursingComposite MaterialsEvaluation of Mechanical, Thermal and Tribological Behaviour of Particulate Filled Glass Fabric Reinforced Epoxy CompositesAnna University, Chennai
1Dr.K.Mohan, 2820033R.Vasanth, RVS College of Engineering08.01.2013PursingWeldingStudy of Micro structural and Mechanical Properties friction surface mild steel with AluminumAnna University, Chennai
1Dr.S.Gopalakrishnan, 2120108A.Nagaraj, Anna University, Chennai02.01.201416.02.2021WeldingA Study on Tribological Behaviour of Aluminium-Alloys  Based CompositesAnna University, Chennai
2M.Umashankaran, NSN College of Engineering and Technology, Karur02.01.2014PursingWeldingPreparation and characterization of Natural and Synthetic Fibers Reinforced polymer Composites.Anna University, Chennai
3G.Senthil, Mahendra Engineering College, Mallasamadram01.01.2016PursingWeldingActivated TIG welding in 321 austenitic stainless steelAnna University, Chennai
Research Grants Received during last five years
S.No
Agency
Title of the Proposal / Project
Investigators/ Dept.
Grants Received (Rs.)
Status
Sanctioned Details (File. No.)
1.
RPS – AICTE
Investigation on Emission Control in Direct Injection LHR Diesel Engine Attached with Electronically Controlled EGR operated on oxygenated fuel blends dropped with nanoparticles
Dr. A. Murugesan12,11,765OngoingRef.No.F.No. 8- 29/RIFD/RPS/ POLICY- 1/2016-17
Details of Patents Granted and Filed
S.No
Name of the Patent owner (s) / Inventor (s)
Title
Date of Filing
Date of Publish
Patent No (or) Application No.
Status Granted / Published
1.
Dr.A.Murugesan
Innovative and Efficient Technology for Bio Diesel Production from Non-Edible Oils
01.04.201112.04.20121103/CHE/2011 & 01.04.2011Granted
The details of patents filed at international and national level by faculty and research scholars are furnished in the table below.
S.No
Name of the Inventor(s)
Title
Application No. & Patent filed date
International / National
Current status
1.
G.Venkatachalam R.Dhanasekaran A.Kumaravel
Analysis of Mechanical Properties of LM25 in Comparison with other Grades of Aluminum
2204/CHE/2015 & 30.04.2015
National
Filed
2.
G.Venkatachalam A.Kumaravel
Effect of Lithium and Zirconium addition on LM25 Aluminum cast alloy
2203/CHE/2015 & 30.04.2015
National
Filed
3.
R.Dhanasekaran A.Kumaravel
Improving the Mechanical Properties of LM25 by adding Alloying Elements
2206/CHE/2015 & 30.04.2015
National
Filed
4.
R.Dhanasekaran A.Kumaravel
Design and Fabrication of Piston by using Aluminum alloy
2205/CHE/2015 & 30.04.2015
National
Filed
5.
R.Dhanasekaran A.Kumaravel
Studies on wear Properties of carbide coating on case
carburized steel
1904 / CHE / 2014 & 11.04.2014
National
Filed
6.
R.Dhanasekaran A.Kumaravel
Studies on Thermal Properties of Aluminium Silicon(AL-Sl) Material
1903 / CHE / 2014 & 11.04.2014
National
Filed
7.
P.Muthusamy P.Senthilkumar
Enhancing of matrix Heat Exchanger flow characteristics to recover the waste heat using air as working fluid
935/CHE/2014 & 25.02.2014
National
Filed
8.
P.Muthusamy P.Senthilkumar
Waste Heat Recovery using matrix Heat Exchanger from the Exhaust of an Automobile Engine
934/CHE/2014 & 25.02.2014
National
Filed
9.
R.Dhanasekaran P.Senthilkumar
The Use of Wc-Co Micro particles on the En 353 Steel Substrate to Increase the wear resistance and improve the life of the planetry gear drive system by using plasms
4117 / CHE / 2012 & 03.10.2012
National
Filed
10.
V.P.Venkataramanamurthy
P.Senthilkumar
The use of TIO2 nano particles in the reciprocating compressor lubricant to increase the energy efficiency of vapour compression
refrigeration system
3392 / CHE / 2012 & 16.08.2012
National
Filed
11.
V.P.Venkataramanamurthy
P.Senthilkumar
The use of TIO2 nano particles in the reciprocating compressor lubricant to decrease the total irreversibility of vapour
Compression refrigeration
3391 / CHE / 2012 & 16.08.2012
National
Filed
12.
V.P.Venkataramanamurthy
P.Senthilkumar
Enhancement of pressure in refrigerator S&N BSP compressor using nanolubricants
3390 / CHE / 2012 & 16.08.2012
National
Filed
13.
V.P.Venkataramanamurthy
P.Senthilkumar
The use of TIO2 nano particles in the rotary compressor lubricant to increase the energy efficiency of vapour compression –
refrigeration system
3389 / CHE / 2012 & 16.08.2012
National
Filed
14.
V.P.Venkataramanamurthy
P.Senthilkumar
The use of TIO2 nano particles in the rotary compressor lubricant to decrease the total irreversibility of vapour compression
3388 / CHE / 2012 & 16.08.2012
National
Filed
15.
P.S.Sampath L.Boobathi
Borassus Fruit Fiber Reinborced Epoxy Composite Material
2304 /CHE / 2012 & 11.06.2012
National
Filed
16.
P.Somasundaram
Automatic Jaggery making machine
533 / CHE / 2008 & 03.03.2008
National
Published
17.
A.Murugesan M.Nedunchezhian
Production unit for Biodiesel from non-edible oil
01.11.2007
National
Filed